A straight top edge with a single V groove gives a room a little definition without an ornate moulding. Our Square Edge One V Groove MDF Skirting Board is worth considering when you want a simple, contemporary finish around the base of your walls.
A subtle profile for modern interiors
The square edge keeps the outline clean, while the V groove adds a small decorative detail. Consider it for a contemporary renovation or a room where you want the skirting to complement the décor rather than dominate it. Before choosing a height, compare the proportions against your doors, walls and existing trims.
Standard dimensions and finish choices
Each standard board is 3050mm long and 18mm thick. Choose from four heights: 95mm, 120mm, 144mm and 166mm. The material is moisture-resistant MDF. Moisture-resistant does not mean waterproof: address damp or leaks and follow suitable preparation and finishing instructions.
Choose Unprimed if you prefer to carry out the priming yourself, or Primed if you want a board supplied with a primer coat before your final paint finish. Check cut ends and any worked areas during preparation; a primed board is not a finished painted board.
Clear prices before you choose
The following standard prices were checked on 12 October 2026. They are per 3050mm board, before any applicable discount and excluding delivery. Prices can change, so use the product page for the current price.
- 95mm: Unprimed £10.20; Primed £13.20.
- 120mm: Unprimed £10.80; Primed £13.80.
- 144mm: Unprimed £13.25; Primed £16.25.
- 166mm: Unprimed £14.80; Primed £17.80.
You can compare the heights and finishes together on the Square Edge One V Groove product page. Measure the lengths you need, allow for cuts and corners, and compare the full order cost rather than the price of one board alone.
Delivery depends on your postcode
Our delivery service is postcode-based, not a single nationwide flat-rate service. Check the delivery options and charge available for your address at checkout before placing your order. If you are unsure whether we cover your postcode, contact Univers Skirting & Architrave before ordering. Delivery arrangements depend on your location and order, so confirm timing before ordering if you have a deadline.
Bespoke sizes and existing-profile matching
Need something outside the standard dimensions? We offer custom heights, thicknesses and lengths, along with matching an existing profile, subject to reviewing your requirements and providing a quotation. Bespoke work is not priced by the standard options listed above.
For an enquiry, send your required dimensions, quantities and delivery postcode. If you want to match existing skirting, include clear photographs and measurements of the profile. We will need to assess the details before confirming what can be supplied, the price and the lead time.
Why order from Univers?
You can compare standard sizes and finish prices on one product page, choose a moisture-resistant MDF board, and discuss a bespoke requirement when the standard range does not fit your project. Clear dimensions make it easier to plan your order and check compatibility with existing trims.
View Square Edge One V Groove MDF Skirting Board to choose your height and finish. Still comparing designs? Browse all skirting boards before deciding.